✅ REPLACE CLAY BAR: Clay bars are labor intensive, expensive, and time consuming. The Nanoskin Autoscrub is easier to use than a clay bar, lasts many times longer than a clay bar, and uses less effort and time to exfoliate and decontaminate surfaces before wax and coating process.

✅ MEDIUM GRADE: Formulated for heavily contaminated and light colored painted surfaces. It can also be used on general surfaces such as glass, plastic, and metal. The medium grade version is available in 4 variations to suit different applications: dual action machine polishable pad, foldable towel, handy sponge and wash style mitt.

✅ SURFACE DECONTAMINATION: When used with the proper lubricant, the Nanoskin Autoscrub can be used to decontaminate painted surfaces, glass, plastic, metal & more. Contaminants such as brake dust, industrial fallout, rail dust, overspray, and tree sap will be efficiently extracted out using the Nanoskin Autoscrub.

✅ EXFOLIATION PROCESS: Using Autoscrub for surface deep cleansing is like a process wherein your skin’s dead cells are removed from your epidermis. The patented Autoscrub plays a key and crucial step before any paint correction, waxes, sealants and /or ceramic coating to achieve optimized performance.

✅ FAST & DURABLE: The Nanoskin Autoscrub performs work up to 3X faster and last up to 10X longer than traditional clay bar. No need to stop, fold, and reform like clay bar. Just keep working without interruption with Nanoskin Autoscrub. When Autoscrub accidentally dropped on the floor, simply rinse with water and continue.

Nanoskin Autoscrub quickly achieves professional results using advanced rubber polymer technology that replaces the use of traditional clay bars. When used by hand or a dual action orbital polisher, the Autoscrub safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from: automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned. This is done by simply rinsing off the accumulated contaminates with water. In the event you should drop the Autoscrub on the ground it can be cleaned. Simply rinse the sponge pad clean and you’rere ready to use it again. The Autoscrub glides easily and is sturdy in your hands for controlled handling unlike clay bars where constant reshaping is required.

Application Use:
• For surface prep: use with NANOSKIN GLIDE Instant Spray Lubricant
• For best results on the paint, use NANOSKIN NANO SHOCK Hydrophobic Spray Lubricant Sealant.
• For glass prep and hydrophilic anti-static sealant: use with RAIN PREP Glass Cleaner/Activator then follow with RAIN Glass Sealant.

NOTE:
• Using with 6" soft-edge DA pad is highly recommended.
• Sufficient lubrication is crucial to the AUTOSCRUB application.
• Plain water is NOT an adequate lubricant.
• DO NOT use with rotary polisher.
• The AUTOSCRUB is not solvent resistant.
• Remove tar & grease before application

Helpful Tips:
• The AUTOSCRUB has a protective coating to ensure stability within transportation.
• To break in the pad, moisten the AUTOSCRUB with desired lubricant.
• Then moisten a portion of window glass or other preferred glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam; this is the protective sealant coming off.
• Do not use until the polymerized rubber is soft and slightly tacky.
• Cold temperatures may stiffen the pad. Warm the panel / surface before using.
• There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine and our advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.

Compare with clay bars:

DIRECTIONS for use Directions:
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55 °F and over 144 °F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
• Thoroughly wash vehicle free of dust, sand, and dirt.
• Dilute GLIDE to desired strength. (16 Oz. makes 1 Gal. RTU.)
• Mist sufficient GLIDE onto the surface evenly.
• Work the surface with dual action orbital polisher (Low Speed) using light pressure or by hand with Hand Strap Applicator (AS-007) using light pressure.
• Wipe off residue with clean dry microfiber towel.

TechnicalInfo Contains:
Coming soon...