» Specifiche tecniche / Technical specs | » English description

Cavo ottico attivo HDMI 2.0 per noleggio e staging, installazioni fisse, applicazioni residenziali e altre applicazioni. Non richiede alimentazione esterna ed è Plug & Play come un normale cavo HDMI. Combinando fibre ottiche e rame nello stesso cavo, può trasmettere un segnale HDMI 2.0 senza perdite con una risoluzione massima di 3840 x 2160 @ 60 Hz 4:4:4 fino a 100 metri. Beetek lo ha progettato utilizzando una guaina in silicone fluido più morbida e il pressacavo SR, e l'interno è dotato di un'armatura a spirale in acciaio inossidabile, che offre una resistenza alla trazione e alla compressione superiore.  Caratteristiche principaliNon necessita di alimentazione, basta collegarlo e utilizzarlo come un normale cavoTrasmissione video lossless senza compressione o ritardoVelocità di trasmissione di 18 Gbps con risoluzione massima di 3840 x 2160 @ 60 HzIl connettore HDMI Plug-Sure Type garantisce una connessione affidabileLa guaina esterna in silicone fluido, flessibile ma robusta, e il rivestimento a spirale corazzato integrato rendono il cavo resistente e flessibile allo stesso tempoL'interfaccia HDMI 2.0 completa supporta HDR, HDCP, ARC, CEC e 3D

Technical characteristics

• Lenght: 20 m
• Signal type: HDMI 2.0
• Input connector type: HDMI Type A male
• Output connector type: HDMI Type A male
• Connector fastening type: Plug-sure type HDMI connector
• Connector gold plating: gold-plated copper shell
• Connector structure: zinc alloy mold
• Power from connector (TX): yes
• Cable power supply (RX): yes
• Power: 250 mW
• Connector dimensions: HDMI Type A male, 54 x 19.8 x 11.9 mm
• Plug & Play: yes
• In-wall installation: not supported
• Fiber type: multi-mode OM3-300 x 4
• Fiber wavelength: 850 - 1300 nm
• Copper wire material: 7 multi-strand tinned copper wires
• Copper wire specification: 24AWG1, 26AWG1, 28AWG3, 30AWG2
• Cable structure: optical fiber + inner jacket + Kevlar + tissue paper+ armored tube + PTFE + outer jacket
• Cable diameter: 6.5 mm
• Jacket color: gray
• Jacket material: flow silicone
• Spiral tube diameter: 4.5 mm ± 0.1 mm
• Spiral tube color: silver
• Spiral tube material: stainless steel
• EDID: pass-through
• DDC: yes
• HDMI audio: yes
• 3D: yes
• CEC: yes
• ARC: yes
• HDCP: HDCP 2.3
• HDR: yes
• XvYCC color space: yes
• Optical module: 4 x 10G multi-mode optical
• Technical characteristics: photoelectric conversion technology
• Optical module lifetime: 100,000 hours
• Resolution: 3840 x 2160 @ 60 Hz
• Clock bandwidth: 600 MHz x 3
• Transmission rate: 18 Gbps
• Reclocking chip: support above 30 m 
• Pixel reclocking: yes
• ESD protection: yes
• Hot swap: yes
• Delay: zero frame delay
• Compression: none
• Sampling rate: 8 - 16 bit within the bandwidth range
• Sampling ratio: RGB 4:4:4, YUV 4:4:4, YUV 4:2:2, YUV 4:2:0
• Anti-jamming: yes
• Tensile strength: ≤ 700N
• Compressive strength: 2000 N/10 cm
• Minimum bending radius: dynamic > 10D; Static > 20D (*D is the outer diameter of the cable)
• Operating temperature: -30 to 80 ℃

EN:
HDMI 2.0 active optical cable for rental & staging, fixed installations, residential and other applications. No external power required and Plug & Play like a regular HDMI cable.Combining fiber optics and copper in the same cable, it can transmit a lossless HDMI 2.0 signal with a maximum resolution of 3840 x 2160 @ 60 Hz 4:4:4 up to 100 meters. Beetek designed it using a softer flow silicone jacket and SR strain relief, and the interior is equipped with a stainless steel spiral armor, which provides superior tensile and compression resistance.Main featuresNo power required, just plug it in and use it like a normal cableLossless video transmission without compression or delay18 Gbps transmission rate with a maximum resolution of 3840 x 2160 @ 60 HzHDMI Plug-Sure Type connector ensures a reliable connectionFlexible yet sturdy flow silicone outer jacket and integrated armored spiral jacket make the cable both durable and flexibleFull HDMI 2.0 interface supports HDR, HDCP, ARC, CEC and 3D